Installation Instructions

Installation and User Instructions

TidyHangers

Worlds most Versatile Coat Rack

June 2022

Version 1.00

All rights reserved. No part of this publication may be reproduced, distributed, or transmitted in any form or by any means, including photocopying, recording, or other electronic or mechanical methods, without the prior written permission of the publisher. For permission requests, write to the publisher, addressed “Attention: Permissions Coordinator,” at the address below.

Tinde AS
www.Tidyhangers.com

TRADEMARKS

TidyHangers is Trademarked by Tinde AS. Company located in Norway. Distributor is Nextnor AS

Table of Contents

1 PREFACE 5

1.1 Description of the User 5

1.1 Explanation of Safety Warnings 5

1.2 Obtaining Documentation and Information 5

1.2.1 Internet 5

1.2.2 Ordering Documentation 5

1.2.3 Documentation Feedback 5

2 Description of the product 6

2.1 Purpose of the Product 6

2.2 How to Install the Product 6

2.2.1 Removal of the transport and packaging restraints 6

2.2.2 Packaging contents 6

2.2.3 Space needed 8

2.2.4 Layout plan (Recomended) 8

2.2.5 Connecting the Different parts 9

1 PREFACE

1.1 Description of the User

TidyHangers

It’s an elegant and versatile wall-mounted coat rack that can be installed in an infinite number of combinations.

The TidyHangers consists of knobs joined together by link connectors, creating a clean, contemporary design. Perfect for hallways, bathrooms, kitchens, bedrooms, offices etc.

Each knob can also be installed as a standalone coat hanger or be assembled in a grid arrangement of any size.

TidyHangers can be easily fixed to any wall, with all screws hidden to compliment the minimalistic and clean aesthetic.

It’s your choice!

1.1 Explanation of Safety Warnings

CAUTION!
Package is containing parts that is not suitable for children under 3 years. Choking HAZARD

1.2 Obtaining Documentation and Information

1.2.1 Internet

The latest version of the documentation is available at the following address: http://www.tidyhangers.com

1.2.2 Ordering Documentation

Documentation, user instructions and technical information can be ordered by Email to TidyHangers at Tidyhangers@tidyhangers.com

1.2.3 Documentation Feedback

If you are reading Tidyhangers product documentation on the internet, any comments can be submitted on the support website. Comments can also be sent to Tidyhangers@tidyhangers.com

We appreciate your comments.

2 Description of the product

2.1 Purpose of the Product

TidyHangers is an elegant and versatile wall-mounted coat rack that can be installed in an infinite number of combinations.

The rack consists of knobs joined together by link connectors, creating a clean, contemporary design suited for hallways, bathrooms, kitchens, bedrooms, offices etc. Each knob can also be installed as a standalone coat hanger or be assembled in a grid arrangement of any size.

2.2 How to Install the Product

2.2.1 Removal of the transport and packaging restraints

Open the cartboard box with just pushing the internal box out from the outside holding box.

2.2.2 Packaging contents

Basic package:

3x Knobs

3x Coat hooks

2x 15 cm links

2x 18 cm links

2x short links

1x Link connectors

1x level

Screws and manual

Creative Pack Contains: (Available on Amazon.com)

6x Knobs

7x Coat hooks

6x 15 cm links

6x 18 cm links

6x short links

5x Link connectors

2x level

Screws and manual

2.2.3 Space needed

The Hanger is customable and can be designed in any space bigger than a 2-D square space of 200x100mm

2.2.4 Layout plan (Recomended)

Since the hangers can be designed in infinite different installations, we suggest to make your design on a open floor space to plan for the installation of the design on the wall. Its easier to install the product on the wall if you have decided what design you whant to use.

2.2.5 Connecting the Different parts

All Connections is on-way assembly. It can only fit in the designated position. This is for the Links, Hooks, Knobs and Link Connectors.

The Cover Ring is designed to give your Knobs in the rack a seem free look after the screws is installed, and the back of the knob is facing the wall.

Identify the positions to cut away. This can be done by applying force by bending or sharp knife, scissors.

The cover-rings can be cut so that the non-used slots is covered when the knobs is installed on the wall. They can be cut using a sharp tool such as a knife, cutting-pliers or scissors.

After the rings is cut according to the availible slots and the slots used, they are easy to press in the slot. NOTE: Due to lubrication purpose the surface has a slight wax coating that may leave some wite residue. This can easly be wiped off by fabric towel or similar.

Before the Installation in the screws, you can use the Leveler that is in the package for easy leveling. (NOTE: Some Houses of Wood, may cause the level of gravity to be slightly off the floor and the straightness of the wall. We recommend to only use the lever as an indication for leveled installation.)

The leveler can also be used on any angle, for convenience.

We recommend that the screw fastened shall be on top over gravity, so that the Coat Rack has maximum load applied in correct direction. If you want to use for high loads, you might use 2 screws in one knob, but usually for normal use 1 screw installed according to picture above, is enough.

After installation, the Lid can be screwed on its place to cover the screws and give the Coat Rack a delicate look for your wall.

We can’t wait to see what you will create with Tidyhangers.